Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Unpack Grill
1. Remove all packaging materials and remove grill from the
shipping base.
2. Move grill close to desired outdoor location.
3. Open the grill hood.
Remove Packaging Material Inside the Main Grill
1. Use a utility knife to cut yellow straps and packing tape to
open box from top and remove the boxes
2. Remove foam block and wrap from inside the grill.
3. Remove the warming rack and grill grates from inside the
grill and remove the package inside the firebox.
INSTALLATION INSTRUCTIONS
Freestanding Outdoor Grill Installations
Attach cart frame top panel
1. Attach the cart trim piece on the left cart frame by
using 2 5/32-in x 28mm Stage screw and 2 5/32-
in x 10mm Truss Head Screw as shown in below
picture.
A.
5/32-in x 10 mm Truss Head Screw
B.
5/32-in x 28 mm stage screw
2. Repeat step 1 for attaching the right cart trim piece
on the right cart frame as shown below.
A
B
A.
5/32-in x 10 mm Truss Head Screw
B.
5/32-in x 28 mm Stage screw
A
B
15
Publicité
Table des Matières
