Publicité
Les langues disponibles
Les langues disponibles
ENGLISH – Motorized screen user manual
Our screens are suitable for indoor use at normal temperature (20 - 25 °C) and humidity conditions. Special precautions are necessary for outdoor use, especially as regards
temperature levels and the presence of dust. Exposure to temperatures of over 50 °C can cause permanent deformation of the screen's flatness, or the screen to come away
from the roller.
Avoid prolonged exposure of the projection screen to solar light to prevent yellowing of the same (ensure that exposure to solar light does not cause the screen to reach said
temperature level).
Since electrostatic charge tends to accumulate on the projection screen (which is made of PVC), attracting dust, excessive dustiness in the projection environment can
deteriorate the optical quality of the screen (see projection screen cleaning instructions).
WARNING: Do not manually force the screen's unrolling: this could result in the motor being damaged or the screen's case to come away from the wall mount brackets.
Do not allow children to play with the screen's control panel. Keep remote control out of children's reach.
Monitor screen movement and allow no-one near it until it is completely closed.
The following operations: blocking, preventing or forcing the screen's movement, hanging or swinging from it, adding or applying any object to the screen or backdrop,
modifying the screen's structure – are strictly forbidden and could result in damages to the screen's rolling system and ensuing hazard to persons and things.
Screens and their projection surfaces are delicate and must be cleaned with great care, according to the following instructions:
Never use solvents, chemical or abrasive products, or pointed tools to clean the surface.
Avoid contact with other materials (varnishes, inks etc) as they might be impossible to remove from the canvas.
FABRIC VISION, REFERENCE, HELIOS
FABRIC
VISION, REFERENCE, HELIOS: Remove dust from the case with a soft, clean cloth and a non aggressive detergent as necessary.
FABRIC
FABRIC
VISION, REFERENCE, HELIOS
VISION, REFERENCE, HELIOS
Clean the projection screen with a soft, clean, damp cloth, and a neutral or alcohol-base detergent as necessary. Since rubbing the screen with a cloth during cleaning operations can cause electrostatic
charge to accumulate, we recommend the subsequent application of an antistatic liquid with a clean cloth, to avoid dust being attracted again
GENERIC
GENERIC PROFIL
GENERIC
GENERIC
PROFIL
PROFILE E E E : : : : Remove dust from the case with a soft, clean cloth and a non aggressive detergent as necessary
PROFIL
VELVET PROFILE
VELVET PROFILE: Clean profile with a soft clean cloth, or a brush with soft, antistatic bristles. A vacuum-cleaner brush may be used, provided its bristles are soft and perfectly clean.
VELVET PROFILE
VELVET PROFILE
STRUCTURE and ANCHORING BRACKETS: The state of the product and the anchoring capacity of its brackets must be checked regularly. In case of canvas deformation or rips, or loosening of structural
STRUCTURE and ANCHORING BRACKETS:
STRUCTURE and ANCHORING BRACKETS:
STRUCTURE and ANCHORING BRACKETS:
components such as brackets or screws, action must be taken immediately to clear the area around the screen and avoid hazard to people and things, replace the defective component and restore the
product's functionality.
WARNING: When installing the screen use plugs and screws suitable for the screen's weight and for the type of wall or ceiling on which the mount brackets are to be fixed, based on the
WARNING:
WARNING:
WARNING:
following criteria
Screen width view
Screen width
Screen width
Screen width
view
view area
view
Overall weight
Overall weight
Overall weight
Overall weight
1. Fasten the brackets to the wall or ceiling, respecting the distances
indicated in the figure (the third bracket is present only in versions over
3m long).
2. Mount the screen by hooking the brackets into the dedicated slots.
3. Tighten the lower screw of the bracket until the case is firmly anchored
(it is not necessary to exert any force).
4.To execute "compulsorily "the procedures described to point 2 before
using the screen.
Made by Adeo Screen sp. Z o.o. (Polska) Specifications are subject to change without notice. E&OE
Doc: BIFORMAT Installation Manual rev5 | 29.01.2015
Please verify that you are working with the latest revision of this document before specifying your screen.
05 05 05 05 WARNINGS AND RECOMMENDATIONS FOR CORRECT USE
WARNINGS AND RECOMMENDATIONS FOR CORRECT USE
WARNINGS AND RECOMMENDATIONS FOR CORRECT USE
WARNINGS AND RECOMMENDATIONS FOR CORRECT USE
06 CLEANING AND MAINTENANCE
06 06
06
area up to
area
area
up to cm
up to
up to
cm
cm
cm
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
CLEANING AND MAINTENANCE
07 INSTALLATION INSTRUCTIONS
07 07
07
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
225
250
275
Kg 34
Kg 40
Kg 47
300
325
350
Kg 55
Kg 58
Kg 60
Page 8
Publicité
