Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Usingthecarryingholder
The shaver can be kept vertically or horizontally. When
transporting the shaver, you can use the carrying holder to
protect the outer foil and prevent erroneous operation of the
switch.
• When transporting the shaver, be sure to clean off any
shavings before attaching the carrying holder.
Attachingthecarryingholder
Attach the carrying holder as illustrated.
• Check that all four protrusions on the shaver are
inserted securely.
Removingthecarryingholder
Remove the carrying holder while pressing down
on both sides.
Charge
Chargingtheshaver
Perform the following steps to charge the shaver if it seems to lose
speed.
You can charge the shaver with the carrying holder attached.
1
1
Turnofftheshaverandinsert
itintheACadaptoruntilit
clicksasillustrated.
• Wipe off any water droplets on the side
terminals.
• If you charge the shaver with the power
switch turned on, it will start working when
you remove the shaver from the AC
adaptor.
2
2
Puttheplugintoahouseholdoutlet.
The charge indicator lamp glows red.
• Charging is completed after approx. 15 hours.
• When charging the shaver for the first time, or when it has not
been in use for more than 6 months, the charge indicator lamp
may not glow for a few minutes, or the operating time may
shorten. Please charge it for more than 23 hours in such cases.
• If the shape of the plug does not fit the power outlet, use an
attachment plug adaptor with proper configuration.
3
3
Disconnecttheplugafterchargingiscomplete.
• Charging the battery for more than 15 hours will not affect battery
performance.
• Recommended ambient temperature for charging is 0 ‑ 35 °C
(32 ‑ 95 °F). The battery may not charge under extreme low or
high temperatures.
2
1
5
Publicité
Table des Matières
