Using The Carrying Holder; Charging The Shaver - Panasonic ES-SL83 Mode D'emploi

Using the carrying holder

The shaver can be kept vertically or horizontally. When
transporting the shaver, you can use the carrying holder to
protect the outer foil and prevent erroneous operation of the
switch.
When transporting the shaver, be sure to clean off any
shavings before attaching the carrying holder.
Attaching the carrying holder
Attach the carrying holder as illustrated.
Check that all four protrusions on the
shaver are inserted securely.
Removing the carrying holder
Remove the carrying holder while pressing
down on both sides.
10
PB013383 - ES-SL83_ (01EN)_05-19-16.indd 10

Charging the shaver

Turn the shaver off before inserting.
Wipe off any water droplets on the Appliance socket.
Charging with the Appliance
plug
1. Insert the appliance plug
into the shaver.
2. Plug in the adaptor into a
household outlet.
Make sure that the low
battery/charge status lamp
is on. If the battery capacity
is too low, the low battery/
charge status lamp will not
turn on immediately.
The charging time is approx. 1 hour.
The charging time many differ with the charging capacity.
Charging the battery for more than 1 hour will not affect
battery performance.
Charging the appliance after each use will not affect the
battery life.
3. Disconnect the adaptor after charging is
completed.
Note
You cannot operate the shaver while charging.
2
1
2016/5/27 14:53:45