<For gentle epilation>
The gentle cap has a skin protector for gentler
remove hair by
holding the skin down to reduce pain.
1. Remove the fast cap
[C].
2. Attach the gentle cap
[D]/the beginner cap
[E].
● Apply the epilator at a 90˚ angle to your
skin. Always make sure that the appliance
is in contact with your skin and press
gently while moving it slowly against the
hair growth.
● Massaging with a body puff may help to prevent ingrown
hairs.
● Reddening might appear after use. A cool towel will help if you
feel pain or there is a rash.
● If your skin gets dry after epilation, we recommend applying a
moisture lotion two days after epilation.
Before use
Charging the appliance
For best performance, fully charge the appliance before use.
You cannot operate the appliance while charging.
Charging time = Approx. 1 hour
The epilator can be used for approximately 30 minutes (40
minutes when using the beginner cap/gentle cap) after 1 hour
of charging. (This will differ depending on the temperature.)
ES-WD94_AM.indb
7
Plug the AC adaptor
epilation, to
into the epilator (a)
and a household
outlet (b).
• The recommended
charge temperature is
15-35 °C (59-95 °F).
2
charging
90˚
Red light
appears.
• The AC adaptor is intended to be correctly oriented in a vertical
or floor mount position.
• If the shape of the plug does not fit the power outlet, use an
attachment plug adaptor of the proper configuration.
Changing the head
1
1
2
2
10 minutes
While
After charging
after charging
is completed
is completed
Blinks once
Blinks once
every second.
Remove the head while
holding the head
release button.
Push the head until it
clicks.
Abnormal
charging
Blinks twice
every 2
every second.
seconds.
1
2
7
2011/12/16
19:12:33