Ariston MGz I Installation Et Mode D'emploi page 13

overview
Overview
This manual is an integral and essential part of the
appliance. Read the instructions and warnings
contained in this manual carefully; they provide
important directions relating to installation, operation
and maintenance safety.
The technical notes and instructions in this
document are intended
technicians so that they may carry out this
procedure correctly, in accordance with standard
procedures.
The module is designed to control multizone/
multitemperature heating systems. The use of the
appliance for purposes other than those specifi ed
is strictly forbidden. The manufacturer shall not be
held responsible for any damage caused by improper,
incorrect and unreasonable use of the appliance or by
the failure to comply with the instructions provided
in this manual. The installation technician must be
qualifi ed to install heating appliances in accordance with
Law 46 dated 05/03/1990, on completion of which
task the abovementioned technician must issue the
customer with a declaration of conformity. Installation,
maintenance and all other interventions must be carried
out in full conformity with current legal regulations
and any instructions provided by the manufacturer.
Incorrect installation can harm persons, animals and
possessions; the manufacturing company shall not be
held responsible for any damage caused as a result.
The zone module is delivered in a pallet. Once you have
removed all the packaging, make sure the appliance is
intact and that no parts are missing. If any parts are not
supplied or if the appliance is damaged, please contact
your supplier. Keep all packaging material (clips, plastic
bags, polystyrene foam, etc.) out of reach of children
as it may present a potential hazard. Before any work
is carried out on the module, make sure you have cut
off the electricity supply by turning the external switch
to the "OFF" position. All repairs, which should only be
performed using original spare parts, should be carried
out by a qualifi ed professional. Failure to comply with
the above instructions could compromise the safety
of the appliance and invalidate all liability on the part of
the manufacturer. Switch the module off by turning
the external switch to the "OFF" position when cleaning
the external parts of the appliance. Clean using a cloth
dampened with soapy water. Do not use aggressive
detergents, insecticides or toxic products.
for installation
CE labelling
The CE mark guarantees that the appliance conforms
to the following directives:
- 2004/108/EC
relating to electromagnetic compatibility
- 2006/95/EC
relating to electrical safety
GB
13