Kenwood KDC-X302 Mode D'emploi page 34

TROUBLESHOOTING
Symptom Remedy
Correct characters are not • This unit can only display uppercase letters, numbers, and a
displayed (e.g. album
name). • Depending on the display language you have selected ( 5),
"NA FILE" Make sure the disc contains supported audio files. ( 33)
"NO DISC" Insert a playable disc into the loading slot.
"TOC ERROR" Make sure the disc is clean and inserted properly.
"PLEASE EJECT" Reset the unit. If this does not solve the problem, consult your
nearest service center.
"NO DEVICE" Connect a USB device, and change the source to USB again.
"COPY PRO" A copy-protected file is played.
"UNSUPPORTED DEVICE" • Check whether the connected device is compatible with this unit
• Reattach the device.
"UNRESPONSIVE DEVICE" Make sure the device is not malfunction and reattach the device.
"USB HUB IS NOT This unit cannot support a USB device connected via a USB hub.
SUPPORTED"
• The source does not The USB port is drawing more power than the design limit. Turn
change to "USB" when the power off and unplug the USB device. Then, turn on the power
you connect a USB device and reattach the USB device. If this does not solve the problem,
while listening to another turn the power off and on (or reset the unit) before replacing with
source. another USB device.
• "USB ERROR" appears
"NO MUSIC" Connect a USB device that contains playable audio files.
• Reconnect the iPod.
"iPod ERROR"
• Reset the iPod.
30
ENGLISH
limited number of symbols.
some characters may not be displayed correctly.
and ensure the file systems are in supported formats. ( 33)
Symptom Remedy
• Sound cannot • Reconnect the Android device.
be heard during • If in [HAND MODE], launch any media player
playback. application on the Android device and start
• Sound output only playback.
• If in [HAND MODE], relaunch the current media
from the Android
device. player application or use another media player
application.
• Restart the Android device.
• If this does not solve the problem, the connected
Android device is unable to route the audio signal
to unit. ( 33)
Cannot playback at • Make sure KENWOOD MUSIC PLAY APP is
[BROWSE MODE]. installed on the Android device. ( 8)
• Reconnect the Android device and select the
appropriate control mode.
• If this does not solve the problem, the
connected Android device does not support
[BROWSE MODE]. ( 33)
"NO DEVICE" or • Switch off the developer options on the Android
"READING" keeps device.
flashing. • Reconnect the Android device.
• If this does not solve the problem, the
connected Android device does not support
[BROWSE MODE]. ( 33)
Playback is intermittent Turn off the power saving mode on the Android
or sound skips. device.
• Reconnect the Android device.
"ANDROID ERROR"/
• Restart the Android device.
"NA DEVICE"
"ADD ERROR" New station creation is unsuccessful.
"CHECK DEVICE" Check the Pandora application on your device.
"NO SKIPS" The skip limit has been reached.