Kenwood KDC-X302 Mode D'emploi page 29

AUDIO SETTINGS
BASS BOOST LEVEL1/LEVEL2/LEVEL3/LEVEL4/LEVEL5 or LV1/LV2/LV3/
LV4/LV5: Selects your preferred bass boost level. ; OFF: Cancels.
LOUDNESS LEVEL1/LEVEL2 or LV1/LV2: Selects your preferred low and
high frequencies boost to produce a well-balanced sound at a
low volume level. ; OFF: Cancels.
SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels.
FADER R15 to F15 (0): Adjusts the rear and front speaker output
balance.
BALANCE L15 to R15 (0): Adjusts the left and right speaker output
balance.
VOLUME OFFSET –15 to +6 (0): Preset the initial volume level of each source.
(Before adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND RECNSTR (Not applicable for RADIO source, AUX source and SIRIUS XM
(Sound source.)
reconstruction) ON: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that
are lost in audio data compression. ; OFF: Cancels.
SPACE ENHANCE (Not applicable for RADIO source.)
SMALL/MEDIUM/LARGE or SML/MED/LRG: Virtually enhances
the sound space. ; OFF: Cancels.
SND REALIZER LEVEL1/LEVEL2/LEVEL3 or LV1/LV2/LV3: Virtually makes the
sound more realistic. ; OFF: Cancels.
STAGE EQ LOW/MIDDLE/HIGH or LOW/MID/HI: Virtually adjust the
sound position heard from the speakers. ; OFF: Cancels.
DRIVE EQ ON: Boosts the frequency to reduce the noise heard from
outside the car or running noise of the tyres. ; OFF: Cancels.
SPEAKER SIZE The frequency and slope settings are automatically set for the crossover of the
selected speaker.
FRONT SIZE 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9/
7×10: Selects according to the connected speaker size for
optimum performance.
TWEETER SMALL/MIDDLE/LARGE: Selects according to the size
range of the connected tweeter for optimum performance. ;
NONE: Not connected.
REAR 3.5"/4"/4.75"/5"/6.5"/6.75"/7"/4×6/5×7/6×8/6×9/7×10: Selects
according to the connected speaker size for optimum performance. ;
NONE: Not connected.
SUBWOOFER 6.5"/8"/10"/12"/15" OVER: Selects according to the connected speaker size
for optimum performance. ; NONE: Not connected.
X ' OVER
TWEETER FRQ 1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/
10KHZ/12.5KHZ: Adjusts the crossover frequency for the
tweeter speaker.
GAIN LEFT –8 to 0: Adjusts the output volume of the left tweeter.
GAIN RIGHT –8 to 0: Adjusts the output volume of the right tweeter.
FRONT HPF F - HPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/
120HZ/150HZ/180HZ/220HZ/250HZ: Adjusts the
crossover frequency for the selected speakers (high pass
filter). ; THROUGH: All signals are sent to the selected
speakers.
F - HPF SLOPE –6DB/–12DB/–18DB/–24DB: Adjusts the crossover slope.
(Selectable only if a setting other than [THROUGH] is selected
for [F - HPF FRQ].)
F - HPF GAIN –8 to 0: Adjusts the output volume of the selected speaker.
25
ENGLISH