Roadstar CLR-2615 Manuel D'instructions page 4

Connecting the AC/DC adaptor (included)
1. Insert the DC plug, at the end of the AC/DC adaptor cord, into the DC
6,5V INPUT socket (15) located on the back of the unit.
2. Connect the AC/DC adaptor into a 230V ~ 50Hz AC power outlet.
Notes:
Use only the supplied AC/DC adaptor. Using other types of adaptor may

damage the unit.
Make sure that the AC/DC adaptor matches with your household voltage

before connecting it into the wall outlet.
Do not touch the AC/DC adaptor with wet hands.

Battery Back-up Power Failure Protection
This radio has a battery back up circuit that will keep the correct time and
alarm settings in the event of a temporary power interruption.
Install 1x CR2025, not included, into the battery compartment located on
the bottom of the unit.
Note: We recommend an alkaline battery for longer usable life.
Change the battery every 9 to 12 months for best result and avoid
possible battery leakage.
If power is temporarily interrupted the display will blink and the radio will not
play. However, the battery back-up circuit will continue to maintain the clock
and alarm settings. When power is restored the clock will display the correct
time and alarm settings, and no adjustment is necessary.
DISPLAY
Normally the LED DISPLAY indicates the TIME.
Press M BUTTON (1) to show DAY OF THE WEEK.

Press TUNING DOWN (2) to show DAY, MONTH.

Press TUNING UP (3) to show YEAR.

SETTING THE LCD DISPLAY
1. In the normal display mode, to set time, keep pressed M BUTTON (1)
English 3 4 English
until hour digits will flash. Press TUNING DOWN(2)/TUNING UP(3) to
adjust hour digits.
2. To set minute, press M BUTTON (1) once more and minute digits will
flash. Press TUNING DOWN(2)/TUNING UP(3) to adjust minute digits.
3. To set the 12/24 mode, press M BUTTON (1) once more and the 12/24
mode digits will flash. Press TUNING DOWN (2)/TUNING UP (3) to a-
djust the 12/24 mode digits.
4. To set year, press M BUTTON (1) once more and the year digits will
flash. Press TUNING DOWN(2)/TUNING UP(3) to adjust year digits.
5. To set the month, press M BUTTON(1) once more and the month digits
flash. Press TUNING DOWN(2)/TUNING UP(3) to adjust month digits.
6. To set the day, press M BUTTON (1) once more and the day digits will
flash. Press TUNING DOWN(2)/TUNING UP (3) to adjust the day digits.
7. Press the M BUTTON (1) to conclude the setting.
SETTING THE ALARM (BUZZER OR RADIO)
1. In the normal Display mode, to set the ALARM TIME, press CLOCK/
RADIO ON/OFF BUTTON (7) for 3 seconds and the ALARM 1 HOUR
digits will flash. Press TUNING DOWN (2)/TUNING UP (3) to adjust the
HOUR digits.
2. To set the ALARM 1 MINUTE, press CLOCK/RADIO ON/OFF BUTTON
(7) once more and the MINUTE digits will flash. Press TUNING DOWN
(2)/TUNING UP (3) to adjust the MINUTE digits.
3. To set the days, press CLOCK/RADIO ON/OFF BUTTON (7) and the 1-
5 digits will flash. Press TUNING DOWN (2)/TUNING UP (3) to adjust
between 1-5 (Monday to Friday), 1-7 (whole week), 6-7 (Saturday and
Sunday) or 1-1 one day of week.
4. Repeat the process to set ALARM 2.
5. Press the CLOCK/RADIO ON/OFF BUTTON (7) button to conclude the
setting.
6. To set the BUZZER or RADIO Alarm Mode, press sequentially VOLU-
ME - (5) (ALARM 1) or VOLUME + (6) (ALARM 2) until you see bb
(buzzer), radio or OFF.