Location Of Controls - Roadstar CLR-2615 Manuel D'instructions

WARNINGS
The exclamation point within the triangle is a warning sign
alerting the user of important instructions accompanying the
product.
The lightening flash with arrowhead symbol within the triangle is
a warning sign alerting the user of "dangerous voltage" inside
the unit.
CAUTION
RISK OF ELECTRIC
SHOCK
To reduce the risk of electric shock, do not remove the cover.
DO NOT OPEN
No user serviceable parts inside the unit. Refer all servicing to
230v~
qualified personnel.
This unit operates on 230V ~ 50Hz. If the unit is not used for a
long period of time, remove the plug from the AC mains.
This unit must not be exposed to moisture or rain.
The power switch in this unit is mounted on the secondary
circuit and does not disconnect the whole unit from the mains
in OFF position.
Ensure all connections are properly made before operating the
unit.
This unit should be positioned so that it is properly ventilated.
Avoid placing it, for example, close to curtains, on the carpet
or in a built-in installation such as a bookcase.
- + Do not expose this unit to direct sunlight or heat radiating
sources.
- +
Make sure all batteries are inserted according to the proper
polarity. Do not mix old batteries with new ones.
If the unit is not used for a long period of time (more than 1
month), remove all batteries from their compartment to avoid
possible leaking.
English 1
CLR-2615
DIGITAL ALARM CLOCK RADIO
TABLE OF CONTENTS
•
•
•
•

LOCATION OF CONTROLS

1. FUNCTION Selector(ON/OFF/AUTO)
2. VOLUME Control/Buzzer Switch
3. TIME SET Button
4. Alarm setting
5. Battery Compartment
6. SLEEP SET Button
7. HOUR SET Button
8. MINUTE SET Button
9. Clock Display
10. SNOOZE Button
11. WAVEBAND Selector
12. TUNING Control
13. Dimmer function
14. Headphone output
15 AUX_Audio IN
16. ALARM OFF Button
2 English
LOCATION OF CONTROLS
POWER SUPPLY
AC POWER
SPECIFICATIONS