SNAP SET
- snapshot activation
Activation (ON) and deactivation (OFF) of automatic saving of a
snapshot when the ring button [25] on the door intercom is pressed.
The snapshot is saved on the mobile unit.
Factory setting: ON
SNAP SHOW
- view/delete snapshots
!
By pressing the
and
the snapshots.
!
To delete the snapshot currently shown on the screen, press the left
—
button
[3 - ] and confirm by pressing the left button
[3 -
] again.
!
To delete all the snapshots saved on the mobile unit, press the
door release button
—
button
[3 -
].
Notes:
#
All snapshots are saved to the integrated ring memory. A
maximum of 100 snapshots can be saved. When the memory is
full, the oldest snapshots are overwritten automatically.
#
At the top left of the snapshot you can see the outdoor station
camera from which it was saved (#1 or #2). At the top right you
can see what number image you are looking at and the total
number of images (e.g. 014/089). The date and time at which the
snapshot was saved are shown at the bottom in the centre.
Factory setting: Restoring the factory settings deletes all the
snapshots
DATE AND TIME
!
By pressing the
and
hours, minutes (e.g. 21:04), year, month and day (e. g. 2020 -
02 - 16) in succession.
!
Pressing the and [2] buttons changes the figure.
Notes:
#
The setting must be correct to get the exact date and time stamp on
the saved snapshots.
#
After a change of battery or if the battery is empty, the date and
time must be reset.
Factory setting: not changed on reset
DOOR SET.
- Volume/duration of the ring tone on the outdoor station /
duration of the door release
Notes:
#
When using two mobile units, the settings for the outdoor station
must be the same.
#
When using two outdoor stations, the settings apply to both
outdoor stations.
Volume
Setting for the ring tone volume on the outdoor
station (1 to 9 bars)
Factory setting: 5 bars
Ring Time (s)
Setting for the duration of the ring tone on the
outdoor station between 0 and 15 seconds. A
[2] buttons, you can scroll through
[5] and confirm by pressing the left
[2] buttons, you can change the
Unlock Time (s)
LANGUAGE
Setting for the screen language (English, Dutch, Polish, German,
French, Italian, Portuguese, Spanish, Russian, Turkish)
—
The language can be set by pressing the direction buttons [2].
Factory setting: German
WALLPAPER
- background image
Setting for the screen background (choice of 3 images)
Factory setting: Image 1
REGISTER
- pairing/deletion of a door intercom
Notes:
#
When a mobile unit is paired with an outdoor station, this is
indicated by a green tick
(no. 1 or no. 2).
#
The hash # indicates the currently selected channel.
#
A maximum of two mobile units can be paired with each doorbell
button. Up to two outdoor stations can be used with one mobile
unit.
!
Move the hash # to the outdoor station required.
To pair another outdoor station (connected to the power supply)
#
DVT60 SET (1 doorbell button): Press and hold the pairing
button [27] until you hear a long beep on the outdoor
station (when the outdoor station is battery operated,
three short beeps can be heard).
#
DVT60/2 SET (2 doorbell buttons): press and hold the
pairing button [27] until you hear long beep on the
outdoor station. Then press the doorbell button you wish to
pair.
!
You now have one minute to complete pairing on the mobile
unit.
!
Press the left button
you wish to pair. The mobile unit beeps.
The mobile unit and the outdoor station then make a "plop"
sound and the start screen appears again.
To delete a door intercom
!
press the left button
!
press the left button
Factory setting: door intercom paired (channel 1)
VERSION
The top two lines indicate the software version of the mobile unit;
below that is the version of door intercom #1 and (if present) #2.
setting of 0 seconds means that the ring tone is
switched off.
Factory setting: 1 second
Setting for the duration of the door release relay
activation between 1 and 9 seconds
Factory setting: 3 seconds
after the outdoor station number
—
[3-"
"] and the select the channel
—
[3 - ] and
—
[3 -
] again to confirm.
GB - 37