Using The Touch Control - KENMORE ELITE 790.4531 Série Manuel D'utilisation Et D'entretien

Setting Surface Controls (cont'd)

Using the Touch Control

Be sure that your fi nger is placed in the center of the touch pad. If the fi nger is not placed
on the center of a pad, the cooktop may not respond to the selection made.
Lightly contact the pad with the fl at part of your entire fi ngertip. Do not just use the narrow
end of your fi ngertip.
LED Messages or Light Indicators Displayed by Main Control
CONTROLS LOCK- This feature allows the cooktop to be locked when no cooking zones are
active. If the cooktop is in use, it will not be possible to lock the controls. Touch and hold
Fig. 1 Fig. 2
the LOCK key pad for few seconds. A beep will sound and the Lock indicator light will glow
(Fig. 2). Once locked no Cooking Zones will activate. To turn the Controls Lock OFF, touch
and hold the LOCK key pad for few seconds. A beep will sound, the Lock indicator light will
turn OFF (Fig. 1) and the cooktop may be used normally.
COOKTOP POWER - The Cooktop POWER key pad activates the entire Cooktop. To power
Fig. 3 Fig. 4
the cooktop, touch and hold the POWER key pad. A beep will sound and the Power LED will
glow (See Fig. 4). The cooktop will be in a ready mode. If no other key pads are touched the
Cooktop Main POWER will turn OFF automatically. To turn the Main Power OFF, touch and
hold the Main POWER key pad. A beep will sound and the Power Indicator Light will turn
OFF (See Fig. 3).
Fig. 5 Fig. 6
ERROR CODES E0 XX- The element power level displays can show error codes. When this happen, two displays are used
to show the error code in format "E0" "XX" where XX indicates the error code (Figs. 5 & 6). If this happen, please refer to
section "Before you call" in this manual.
LED Messages or Light Indicators Displayed by Cooking Element Controls
COOKING ZONE ON/OFF PAD- Each Cooking Element has separate ON/OFF key pads. Once the Main Power key pad
has been touched to activate the cooktop, touch the corresponding Cooking Element ON/OFF key pad once to active the
Cooking Zone needed. "- -" will appear in the LED display. If the corresponding (increase) / (decrease) key pad is
not touched, the request to turn the Cooking Element ON will cancel and the Cooktop Main Power will turn OFF. To set a
Cooking Element power level touch the corresponding Cooking Element (increase) or (decrease) key pad once. To turn
OFF a Cooking Element, touch the Cooking Element ON/OFF key pad once. The Cooking Element Indicator Light will turn
OFF.
8