Sabbath Feature Mode; Warm & Hold Feature; Locking The Controls - KENMORE ELITE 790.4531 Série Manuel D'utilisation Et D'entretien

Setting Surface Controls (cont'd)

Sabbath Feature Mode

When the Sabbath feature is ON, the timer display show "Sb"and all electronic surface element control
displays show "HE". The surface elements can be used even if the Sabbath Feature is on.
To activate the Sabbath Feature Mode:
In order to enter Sabbath at least one radiant burner has to be active. The user has to activate the
(timer up slew) pad and the
displays will show "HE".
To modify a Surface Element power when the Sabbath Feature is active:
When necessary, it is possible to adjust the power of the surface element but you have to remember that the surface element
control will adjust the temperature with a 15-30 seconds delay. Note: No element size change is allowed during Sabbath. If
needed, it has to be changed prior to Sabbath entry.
To turn OFF the Surface Element when the Sabbath Feature is active:
To shut off the surface element while the Sabbath feature is ON, proceed as usual (press the
that the element will immediately turn off .
Note: keys can be used to turn Off any element.
To deactivate the Sabbath Feature Mode:
Touch and hold (timer up slew) pad and the
from the timer display and "HE" will disappear from the element control displays except if it is still hot. The cooktop is now
in its normal operation mode.
If a power failure happens when Sabbath mode is active:
The unit wakes up in Ready mode with all displays lit. "SF" (Sabbath Failure) will be displayed on the timer display and "HE"
in the element displays. To get out of Sabbath mode after the power failure, press the
(lock) pad.
Warm & Hold Feature
The Warm & Hold feature may be used with any of the Cooking Elements.
To Turn the Warm & Hold Feature ON:
1. To select the Warm & Hold feature for any Cooking Element touch the
Element.
2. Touch the key pad located in the main control area. The associated display will show LH (low heat) indicating
that the Cooking Element is properly set to Warm & Hold. If no other key pads are pressed the control will activate the
desired Cooking Element at the Warm & Hold setting.

Locking the controls

The Cooktop Controls can be locked in order to prevent the cooktop from accidentally being turned ON. This feature can be
activated only when no cooking zone is active. If the cooktop is in use, it will not be possible to lock the controls.
To Turn ON the Controls Lock Feature:
Touch and hold the key pad. After a few seconds a beep will sound. The Lock Indicator Light above the
ON indicating the cooktop is locked. This will keep any Cooking Element or Cooktop functions from being accidentally turned ON.
Note: If the cooktop is in used when the Control Lock Feature is activated, the command will be ignored.
To Turn OFF the Controls Lock Feature:
Touch and hold the
will turn OFF indicating the cooktop is unlocked. The Cooking Elements or any of the other Cooktop functions may now be
used.
(lock) pad at the same time for a few seconds. Timer display will show "Sb" and element
key pad. After a few seconds a beep will sound. The Lock Indicator Light above the
key will turn off all elements.
(lock) pad at the same time for a few seconds. "Sb" will disappear
12
key pad) but take note
(timer up slew) pad and the
key pad for the corresponding Cooking
key pad will turn
key pad