Reversing The Door Position - Furrion FCR33ACA-BL Manuel D'instructions

Installation
When using a 3-pronged plug
hazard from this refrigerator.
When using a 3-pronged plug
Using a 3-prong plug and outlet:
3-pronged
plug
3-pronged
plug
When using a grounding adapter, make sure the
Using a grounding adapter:
receptacle box is fully grounded.
Grounding Lead
When using a grounding adapter, make sure the
receptacle box is fully grounded.
Grounding Lead
Grounding
Adapter
NOTES:
Grounding
Adapter
∙ The refrigerator should always
be plugged into its own individual
electrical outlet which has a voltage
rating that matches the rating plate.
∙ Never unplug your refrigerator by
pulling on the power cord. Always
grip the plug firmly and pull straight
out from the outlet.

Reversing the Door Position

You will need: A 10 mm socket driver
and a Phillips screw driver available.
∙ Make sure that your refrigerator is
unplugged and empty.
∙ Have someone available to assist you
in the process.
∙ Keep all of the parts you remove to
9
3-pronged
Receptacle
3-pronged
Receptacle
Receptacle
Box Cover
Receptacle
Box Cover
Screw
Receptacle
Screw
Receptacle
Receptacle
Box Cover
Receptacle
Box Cover
reuse them later.
∙ Removing the door requires that the
refrigerator be tilted backwards.
Adjust the two leveling feet to their
highest position.
NOTE: Do not lay the refrigerator
completely flat as that could damage the
coolant system.
1. Remove the screw holding the
top hinge cover to the top of your
refrigerator, then remove the top
hinge cover.
2. Remove the screws holding the
top hinge to your refrigerator, then
remove the hinge.
3. Remove the screw hole covers from
the top left side of your refrigerator.
(Fig. A)
Fig. A
4. Pull the door upwards and remove it
from the refrigerator.
5. Unscrew the left leveling foot, then
remove it.
6. Remove the screws holding the
bottom hinge and door stopper to the
refrigerator, then remove the hinge
and the stopper. (Fig. B)