Software Installation; Programming The Data Logger - VOLTCRAFT DL-160S Mode D'emploi

7.

SOfTWARE INSTALLATION

1. Place the CD included in the delivery in the corresponding drive of your computer.
2. The installation program starts automatically after inserting the CD. Depending on the system and
its setup, you may however have to start the installation manually. For this purpose, start the file
„setup.exe" on the CD.
3. The installation program takes you semi-automatically through the program installation. During
this, you have to accept the license agreement and have the option to define a different installation
directory than the suggested one. Still leave the CD in the drive after installation. The program icon
is created on the desktop („Sound Datalogger").
4. Connect the datalogger to the computer when it is ready for operation. After a brief moment, the
computer reports a new hardware and starts installing the USB driver.
5. Follow the instructions of the installation program.
6. After the installation is complete, you can start the program „Sound Datalogger"
7. For help or the exact descriptions of each software function, go to the menu "Help – Help Topics".
You can also click on the yellow question mark icon.
8.

PROGRAmmING THE DATA LOGGER

1. Connect the data logger to a PC and start the "Sound Data Logger" program.
2. In the program, the menu item "Instrument – Data Logger Setup" or the small computer icon in the
toolbar is used to configure the data logger (see chapter "Configuring the data logger").
3. For help or the exact descriptions of each software function, go to the menu "Help – Help Topics".
You can also click on the yellow question mark icon.
4. In the blue bar at the top, the setup program displays the connection to the data logger.
- Connected = Data logger is ready for use
- Not Connected = Data logger is not ready for use or is not connected.
5. After you have successfully programmed the data logger, click on "Setup" in order to save the
settings in the data logger. The data logger is now programmed and can be started.
19