Model Description; All Models; Model Designation - Hatco MPWS Série Manuel D'installation Et D'utilisation

MODEL DESCRIPTION

All Models

The Hatco multi-Product Warming Station holds hot fried
products and other pre-heated food at serving temperatures in
kitchen work areas. The Warming Station is constructed of
aluminum and stainless steel. Power to the unit is controlled by
a Power I/O (on/off) Switch. The unit features six overhead
ceramic heating elements and a blanket heating element in the
base. The temperature of the overhead ceramic heating
elements is adjusted using two separate electronic infinite
controls — one for the rear elements and one for the front
elements. The temperature of the base heating element is
adjusted using a thermostatic control. The removable side panel
can be installed on either side of the unit.
Various accessories are available to customize the
multi-Product Warming Station. Refer to the OPTIONS aND
aCCESSORIES section for details.

MODEL DESIGNATION

M P W S - XX
Multi-Product
Warming Station
Front Upper Heat
Control Knob
Power I/O
(on/off)
Switch
Base Heat
Control Knob
mPWS-45 (shown with accessories)
Width (inches)
4
English
Back Upper Heat
Control Knob
Removable
Side Panel
Form No. mPWSm-1116