MODEL DESCRIPTION
All Models
Hatco Convected Drawer Warmers are designed to keep
foods hot, flavor-fresh, and crisp until served. They are non-
humidified, single cavity/single temperature controlled units
that provide even, dry heat for food product that does not
require humidity or moisture. Convected Drawer Warmers are
constructed of rugged stainless steel with durable nylon rollers,
12-gauge stainless steel slides, and heavy-duty hardware.
The insulated top and sides of the drawer warmers provide
maximum energy efficiency.
NOTE: Refer to the OPTIONS AND ACCESSORIES section
for additional available features.
Model CDW-3N
The CDW-3N model has three individual drawers that each hold
a full-size food pan up to 6" (152 mm) deep (pans included).
It features a digital temperature controller and a POWER ON/
OFF (I/O) switch that control the temperature and power for
the entire unit.
Model CDW-3N2
The CDW-3N2 model has six individual drawers that each
hold a full-size food pan up to 2-1/2" (64 mm) deep (pans not
included). It features a digital temperature controller and a
POWER ON/OFF (I/O) switch that control the temperature and
power for the entire unit.
MODEL DESIGNATION
Convected Drawer Warmer
Quantity of Full-Size Drawers
SPECIFICATIONS
Plug Configurations
Units are supplied from the factory with an electrical cord and
plug installed. Plugs are supplied according to the applications.
WARNING
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage,
size, and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install proper voltage and size electrical receptacle.
NOTE: Specification label located on the back of the unit. See
label for serial number and verification of unit electrical
information.
POWER ON/OFF (I/O) Switch
Temperature
C D W - x N 2
No Character = Full-Size Drawers
2 = Split Drawers
Narrow Width Unit
CEE 7/7 Schuko
NOTE: Receptacle not supplied by Hatco.
4
Digital
Controller
Model CDW-3N
NEMA 5-15P
Plug Configurations
English
BS-1363
AS 3112
Form No. CDWM-0418