Husqvarna K 770 Manuel D'utilisation page 4

25. Cutting head
26. Cutting blade (not supplied)
Product overview K 770 SmartGuard
1
4
3
2
12 11
13
1. Operator's manual
2. Air filter cover
3. Information and warning decal
4. Front handle
5. Combination wrench
6. SmartGuard
7. Front belt guard
8. Decompression valve
9. Belt tensioner
10. Rear belt guard
11. Air purge bulb
12. Fuel tank cap
13. Water connection with filter
14. Stop switch
15. Throttle trigger
16. Throttle lockout
17. Choke control
18. Cutting equipment decal
19. Flange, spindle, arbor bushing
20. Cutting blade (not supplied)
21. SmartGuard handle
22. Blade guard
23. Adjustment handle for blade guard
24. Water valve
25. Rear handle
26. Starter rope handle
4
5
8
9
10
14
27. Combination wrench
21
6
20
19
18
7
17
16
15
27. Starter housing
28. Muffler
29. Water connector GARDENA
Symbols on the product
WARNING: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection. Refer to
equipment on page 8 .
This product complies with applicable EC
Directives.
Dust forms when cutting. The dust can
cause injuries if inhaled. Use an approved
respiratory protection. Avoid inhaling
exhaust fumes. Always provide for good
ventilation.
22
23
24
27
26
25
29
®
Personal protective
1447 - 001 - 16.04.2020