Pelgrim GVW537RVS Notice D'utilisation page 74

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

74
The cutlery basket
Long bladed knives stored in an upright
position are a potential hazard. Long
and/or sharp items of cutlery such as
carving knives must be positioned
horizontally in the upper basket. Take
care when loading or unloading sharp
items such as knives.
Forks and spoons should be placed in the
removable cutlery basket with the handles
facing downwards and the knives with their
handles facing upwards.
If the handles protrude from the bottom of the
basket, obstructing the lower spray arm, load
the cutlery with the handles facing upwards.
Mix spoons with other cutlery to prevent
them from sticking together.
For best results we recommend that you use
the cutlery grid provided (if the size and di-
mensions of the cutlery allow it).
The upper basket
The upper basket is designed for plates (des-
sert plates, saucers, dinner plates of up to 24
cm in diameter), salad bowls, cups and
glasses.
Arrange items on and underneath the cup
racks so that water can reach all surfaces.
Glasses with long stems can be placed up-
side down in the cup racks.
For taller items, the cup racks can be folded
upwards.
Before closing the door, ensured that
the spray arms can rotate freely.
Adjusting the height of the upper basket
If washing very large plates you can load
them in the lower basket after moving the
upper basket to the higher position.
Maximum height of the dishes
With upper basket
raised
With upper basket
lowered
To move to the higher position proceed
as follows:
in the upper
in the low-
basket
er basket
20 cm
31 cm
24 cm
27 cm

Publicité

Table des Matières
loading

Table des Matières