Kenwood KDC-X7000DAB Mode D'emploi page 16

BLUETOOTH®
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• The unit answers the call automatically if [AUTO ANSWER] is set to a
selected time. ( 15)
During a call:
• The buttons and display illuminate according to the settings made for
[DISPLAY]. ( 21)
• If you turn off the unit or detach the faceplate, the Bluetooth
connection is disconnected.
The following operations may differ or not available depending on the
connected phone.
To On the faceplate
First incoming call...
Answer a call
Press
number buttons (1 to 6).
Reject a call
Press
End a call
Press
14
or the volume knob or one of the
.
.
To
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Reject another incoming
call
While having two active calls...
End current call and
activate held call
Swap between the
current call and held call
Adjust the phone volume
[00] to [35]
(Default: [15])
Switch between hands-free
and private talk modes
Improve the voice quality
While talking on the phone...
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item ( 15), then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
To return to the previous setting item, press
On the faceplate
Press .
Press .
Press .
Press .
Turn the volume knob during a call.
• This adjustment will not affect the
volume of the other sources.
Press during a call.
• Operations may vary according to the
connected Bluetooth device.
.