Kimex 164-5521 Manuel D'utilisation page 93

SETOPSPOWER
Command
COLOURTEMP
GETPICTUREMODE
PICTUREMODE
GETCONTRAST
SETCONTRAST
GETBRIGHTNESS
SETBRIGHTNESS
GETSHARPNESS
SETSHARPNESS
GETCOLOUR
SETCOLOUR
SETSKINTONE
PICTUREZOOM
SETWB
Set OPS power status
PICTURE COMMANDS
Description
Set colour temperature.
Get picture mode.
Select picture mode.
Get picture contrast
value.
Set picture contrast
value.
Get picture brightness
value.
Set picture brightness
value.
Get picture sharpness
value.
Set picture sharpness
value.
Get picture colour value.
Set picture colour value.
Set picture skin tone
value.
Set picture zoom mode.
Set white balance value.
English - 31 -
string parameter "on" or
"off"
Parameter
str-int n (n = normal, warm,
cool)
no parameter
int n (1 = dynamic, 2 =
natural, 3 = cinema, 4 =
game)
no parameter
int n (0 ≤ n ≤ 100)
no parameter
int n (0 ≤ n ≤ 100)
no parameter
int n (0 ≤ n ≤ 100)
no parameter
int n (0 ≤ n ≤ 100)
int n (-5 ≤ n ≤ 5)
str-int n (n = auto, 16:9,
subtitle, 14:9, 14:9zoom, 4:3,
full(only for HD channels),
panaromic, cinema)
str-int type, value (type =
redgain, greengain, bluegain,
redoffset, greenoffset,
blueoffset) (0 ≤ value ≤250)
"#*Turning OPS on
#*Turning OPS off
#*The OPS is already on
#*The OPS if already off
#*The OPS is not enabled
#*The OPS is not plugged in
#*invalid value entered"
Return
#*setColourTemp() set to n
#*Picture Mode is ... for current
source
"#*setPictureMode() set to n
#*Incorrect picture mode
paramater entered"
#*THE CONTRAST VALUE : ...
"#*Picture contrast value is set to n
#*Same value is set. Do nothing.
#*Incorrect value must between
defined ranges 0-100"
#*THE BRIGHTNESS VALUE : ...
"#*Picture brightness value is set
to n
#*Same value is set. Do nothing.
#*Incorrect value must between
defined ranges 0-100"
#*THE SHARPNESS VALUE : ...
"#*Picture brightness value is set
to n
#*Same value is set. Do nothing.
#*Incorrect value must between
defined ranges 0-100"
#*THE COLOUR VALUE : ...
"#*Picture colour value is set to n
#*Same value is set. Do nothing.
#*Incorrect value must between
defined ranges 0-100"
"#*Picture skin tone value is set
to n
#*Same value is set. Do nothing.
#*Incorrect value must between
defined ranges -5-5"
"#*setPictureZoomMode() set to n
#*Incorrect picture zoom mode
parameter entered"
"#*White Balance is set to value
Invalid value for White Balance
(0-255)
Invalid type for White Balance"