Kimex 164-5521 Manuel D'utilisation page 80

Scheduler Settings
Link options
Volume Settings
Reset to Default
Values
First time installation
Using the scheduler options you can set the unit to turn on automatically at defined time
intervals with the defined input source setting on the desired days of the week. Press OK
to open the Scheduler Settings menu screen. You can set up to 4 different schedulers.
Highlight the first checkbox of the desired scheduler option and check it by pressing
the OK button. Now you will be able to define a time for the Display to be turned on
automatically. Highlight the time box next to the first checkbox and press the OK button,
then use the directional and numeric buttons on the remote to set a time. Press the OK
button again when you are done.
Perform the same steps to set a time for the Display to turn off.
You can also define a source for your scheduler. Highlight the box located under the
Source tab for your scheduler option and press the OK button, then set as desired using
the Left/Right directional buttons. If the Source option is set as Last Source, the input
source will not be changed at the power-up. If the Source option is set as USB, the
media files in the connected USB device will be played back automatically as explained
in the section entitled 'USB Auto Play Feature'.
Lastly, you can select the week day/s for your scheduler setting to be activated. Highlight
the checkbox under the desired day tab and press OK to check. Highlight and press
OK a second time to uncheck a box. The scheduler will be active on the checked days
of the week.
You can also set a backlight scheduler. After setting the On, Off, Source and day options
highlight the checkbox under the Backlight column and press OK. The checkbox will
be checked and backlight level setting screen will be displayed. Set On value and
Off value using the sliders and then press OK to save. Mind that, in case you set a
backlight scheduler, the display will not be turned on or off, only the backlight values
will be changed at defined time interval. If Source option is set as Last Source the
backlight settings will be applied to all sources, otherwise the settings will be applied
to the selected source only.
Press the Green button on the main scheduler screen to save settings when complete.
Press OK to open the Link Options menu screen. Current Start url and Settings url
links will be displayed. These items are for information only and not selectable. Open
browser initial page and NTP server link preferences can be configured using the
related options.
Press OK to see available menu options.
Highlight this option and press the OK button on the remote to return the Display to
default settings.
Highlight and press OK to perform First Time Installation and reset all settings to factory
settings. You will need to enter the correct PIN to carry out this operation.
Note: Enter the PIN you have defined during the First Time Installation process.
English - 18 -