Storage, Disposal - WIKA WU-20 Mode D'emploi

10. Troubleshooting / 11. Storage, disposal
USA, Canada: If the problem continues, contact WIKA or an authorized agent for assistance. If the
pressure transducer must be returned obtain an RMA (return material authorization) number and
shipping instructions from the place of purchase. Be sure to include detailed information about the
problem. Pressure transducers received by WIKA without a valid RMA number will not be accepted.
Process material certificate (Contamination declaration for returned goods)
Purge / clean dismounted instruments before returning them in order to protect our employees and the
environment from any hazard caused by adherent remaining media.
Service of instruments can only take place safely when a Product Return Form has been submitted and
fully filled-in. This Return Form contains information on all materials with which the instrument has come
into contact, either through installation, test purposes, or cleaning. You can find the Product Return Form
on our internet site (www.wika.de).
11.

Storage, disposal

WARNING!
When storing or disposing of the transducer, take precautions with regard to remaining
media in removed transducers. We recommend cleaning the transducer properly and
carefully. Remaining media in the pressure port may be hazardous or toxic!
Storage
Mount the protection cap when storing the transducer.
Disposal
Do not dispose of with household waste. Ensure a proper disposal in accordance with
national regulations.
WIKA operating instructions, model WU-2x
EN
23