Publicité
4-12. Battery Charging (/BAT) option
An option model for battery charging operation is available. It comes in two output voltages namely, 24V & 48V with
ex-factory setting of 29V & 58V respectively.
However, in conjunction with the Vadj and PV functions, the output voltage can be set to the range shown on the charts
below.
24/BAT should be used to charge 24V battery while 48/BAT should be used to charge 48V battery.
Battery charging (Constant Current) is applicable for valid output voltage range. The unit may hiccup below this voltage
range.
Connection method
Power Supply
+S
+Vm
-Vm
-S
PV
COM
Load
External voltage
9
TDK-Lambda
GWS
Series
500
INSTRUCTION MANUAL
Publicité
