Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Clear All
All channels are deleted from the channel memory.
1
Select "Channel", then press ▶ or ENTER.
2
Press ▲ or ▼ to select "Add/Delete", then press ▶
or ENTER.
3
Press ▲ or ▼ to select "Clear All", then press ▶ or
ENTER.
Add/Delete
Adding Channel
>>
Add/Delete
>>
Clear All
>>
: Select
ENTER:Set
Checking the digital
signal strength
This TV will allow you to view the digital signal
meter for digital channels.
1
Select "Channel", then press ▶ or ENTER.
2
Press ▲ or ▼ to select "DTV Signal".
3
Press ▶ or ENTER to check the Digital signal
strength.
The Digital Signal strength screen will appear.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
DTV Signal
0
50
Signal Level
NOTE:
•
Signal meter feature is not available for analog
channels.
•
After 240 seconds, DTV Signal screen will return to
normal TV-operation automatically.
Labeling channels
Channel label appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
You can choose any four characters to identify a
channel.
To create channel labels
1
Select "Channel", then press ▶ or ENTER.
2
Press ▲ or ▼ to select "Ch Label", then press ▶
or ENTER.
The "Ch Label" menu will appear.
3
Press ◀ or ▶ to select a channel you want to
label, then press ▼.
20
100
Ch Label
Channel Number
15-1
Ch Label
Label Clear
>>
4
: Select
: Adjust
Press ◀ or ▶ repeatedly until the character you
want appears in the first space.
Ch Label
Channel Number
15-1
Ch Label
A
Label Clear
>>
: Select
: Adjust
ENTER:Set
The characters rotation as follows:
SPACE
If the character which you desire appears, press
ENTER.
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
5
Repeat steps 3-4 for other channel. You can
assign a label to each channel.
6
When you finish inputting the label name, press
EXIT to return to the normal screen.
To clear a Ch Label
After step 3 above, press ▲ or ▼ to select "Label
Clear", then press ▶ or ENTER.
NOTE:
•
The channel labels will be reset after "Automatic
Search" on page 19.
Labeling video inputs
The Video Label feature allows you to label each
input source for your TV.
1
Select "Setup", then press ▶ or ENTER.
2
Press ▲ or ▼ to select "Video Label", then press
▶ or ENTER.
3
Press ▲ or ▼ to select an input which you want to
label.
4
Press ◀ or ▶ to select the desired label for that
input source.
Video Label
Video1
-
Video2
-
Component
-
HDMI1
-
HDMI2
-
: Select
: Adjust
–
: Uses the default label name
VCR
: Video cassette recorder
DVD
: DVD video
DTV
: Digital TV set-top box
SAT
: Satellite box
CBL
: Cable box
HD
: HDMI device (only for HDMI inputs)
, () @ / + = -
-
Publicité
Chapitres
Table des Matières
Dépannage
