Makita 1911B Manuel D'instruction page 7

001613
1
001614
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
Sharpening the planer blades
Always keep your
performance possible. Use the sharpening holder to
remove nicks and produce a fine edge.
1
001610
First, loosen the two wing nuts on the holder and insert
the blades (A) and (B), so that they contact the sides
(C) and (D). Then tighten the wing nuts.
1. V groove
1
2. Front base
2
1. Align the (Y)
groove with the
edge of the
workpiece
blades sharp for the
1. Sharpening
holder
1
2
001611
Immerse the dressing stone in water for 2 or 3 minutes
before sharpening. Hold the holder so that the blades
both contact the dressing stone for simultaneous
sharpening at the same angle.
001612
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always
using Makita replacement parts.
OPTIONAL ACCESSORIES
best
CAUTION:
These
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
110 mm (4-3/8") Planer blade
•
Sharpening holder assembly
•
Blade gauge
•
Dressing stone
•
Socket wrench 9
•
Dust bag
•
Guide rule
•
NOTE:
Some items in the list may be included in the tool
•
package as standard accessories. They may differ
from country to country.
7
1. Wing nut
2. Blade (A)
3. Blade (B)
4. Side (C)
5. Side (D)
4
5
3
accessories or attachments
persons. Only use
are
accessory or