9. Insert the bolt-pin(6) into the bottom hinge(5);
10. While holding the door in the closed position, attach the bottom
hinge(5) onto left side of the bottom frame with two screws(8),
do not tighten the two screws(8) until the top of the door is
parallel to the counter top.
figure 1
Figure 1: Represents position of components prior to door reversal.
Figure 2: Represents position of components after door reversal.
Installing the handles
This refrigerator has been bulit with external handles, which are in poly
bag. Please follow instruction below to install them:
12
figure 1
14
12
13
14
12
13
figure 2
-27-
12
figure 2
figure 3
14
13
1