Rear connections
12V DC 1.2A
Input for supplied
mains adapter only
Setting up your Evoke H4
To set up your Evoke H4:
1.
Unclip the aerial and fully extend it.
2.
Connect the supplied mains adapter to the input on the back of your Evoke H4.
3.
Plug the mains adapter into the mains supply.
6
3.5mm output for
stereo headphones
>
Au
x in
Analogue stereo
input for auxiliary
cables
12V DC 1.2A
Aux in
Micro USB
connector for
software updates
12V DC 1.2A