Handpiece Connection - DENTSPLY ProUltra Manuel D'utilisation

STEP-BY-STEP INSTRUCTIONS
I. INSTALLATION
1.1

HANDPIECE CONNECTION

Connect the handpiece by plugging it into the cable socket.
Do not rotate.
1.2
TIP CONNECTION
The handpiece is a high-tech unit requiring precautions for its
use. the tips must be screwed and moderately tightened with
the wrench (see Fig. 1)
NOTE:
For correct tip vibration, the tip must be tightened properly
but not over-tightened with force. Remove the tip after each
procedure to avoid jamming.
8