TFA 60.2018 Mode D'emploi page 10

TFA_No. 60.2018_Anleitung 28.06.2017
Digital alarm clock
• Press the HOUR/MONTH button to adjust the hours.
• Press the MIN/DATE/°C/°F button to adjust the minutes.
7.4 Alarm functions
• Slide the switch to the position AL ON to activate the alarm function.
• The alarm symbol and the snooze symbol appear on the display.
• When the adjusted alarm time is reached, the alarm rings.
• If the alarm is not stopped manually, the ascending alarm tone automatically turns off after one minute and the alarm will
be reactivated at the same set time on the following day. The alarm symbol and the snooze symbol remain on the display.
• Press any button to turn off the alarm sound or press the SNOOZE/LIGHT button to activate the snooze function.
• The backlight turns on for a short period.
• The snooze symbol flashes on the display.
• The alarm sound will be interrupted for five minutes.
• Press any button to turn off the snooze function.
• Slide the switch to AL OFF, to turn off the alarm function.
• The alarm symbol and the snooze symbol disappear from the display.
18
14:41 Uhr Seite 10
– 18 –
Digital alarm clock
8. Backlight
• Press the SNOOZE/LIGHT button and the backlight will be activated for 5 seconds.
• Move the SENSOR ON/OFF switch to ON, a weak backlight turns on automatically as soon as the light sensor registers
darkness.
9. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the batteries if the device will not be used for an extended period of time.
• Keep the device in a dry place.
9.1 Battery replacement
• Change the batteries when the device functions become weak.
• Open the battery compartment and insert three new AAA 1.5 V batteries.
• Close the battery compartment again.
10. Troubleshooting
Problem Solution
➜ Ensure the batteries' polarity are correct
No display
– 19 – 19