Locating A Specific Disc - Sony CDP-CE535 Mode D'emploi

Locating a Specific Disc

You can locate any disc before or while playing a disc.
DISC 1 – 5 DISC CHECK
DISC
DISC SKIP +/–
To locate Press
The next disc DISC SKIP while playing a disc
The next or succeeding DISC SKIP + repeatedly until
discs Z you find the disc
The current or preceding DISC SKIP – repeatedly until
discs Z you find the disc
A specific disc directly DISC 1 – 5.
When using the remote, follow
the procedure below.
1 Press DISC.
2 Press the number button of
3 Press ENTER.
A disc while checking the
DISC CHECK while the disc
labels
tray is open. The disc tray turns
to show you each disc label.
When the disc you want comes
in front of you, press · to
continue playing.
A disc by scanning the first
DISC CHECK before you start
track of each disc for 10
playing while the disc tray is
seconds
closed. When you find the disc
you want, press · to continue
playing.
· DISC SKIP
Number
buttons
ENTER
·
the disc.
You can extend the playing time during scanning the
discs
Press DISC CHECK repeatedly until the playing time
you want (10, 20 or 30) appears in the display. Each time
you press the button, the playing time changes cyclically.
Notes
• When you press the DISC CHECK button, the play mode
automatically changes to ALL DISCS Continuous Play
mode.
• When you've opened the disc tray by pressing the
EX-CHANGE button, you cannot use the DISC CHECK
function.
• Even if you press the DISC CHECK button while
"REPEAT" appears in the display (see page 14), the player
stops after scanning all the discs once.
Playing CDs Playing CDs
13
GB