Installation and Connections
Installation
Applicable Lens
2
/
-inch C-mount lenses can be attached to the camera
3
head.
Use a C-mount lens whose projected part from the lens
mount surface is within the standard requirement.
Note
Attaching a lens whose projected part from the lens
mount surface is nonstandard may damage the inside of
the camera.
Mounting a Microscope Adaptor
To attach the camera to a microscope, it is necessary to
attach an appropriate adaptor.
For mounting procedure, refer to the instruction manual
of the microscope adaptor to be used.
Microscope adaptor
Attaching the Lens
1
Remove the lens mount cap of the camera head.
2
Align the threaded portion of the lens mount with
that of the camera mount.
3
Slowly rotate the lens clockwise to fix the lens to
the camera head tightly.
Mounting on a Tripod
The camera has a screw hole at the bottom of the camera
head. A tripod can be attached using the following
screw.
1/4 – 20UNC
= 4.5 mm ± 0.2 mm
Installation
29
GB