Cattani Maxi-Smart Manuel D'utilisation page 34

• Introduction
• Signs and warnings
• Introduction
The following presentation provides information on the assembly and starting up of the Maxi-
Smart unit as well as on hazards and preventative precautions.
This handbook should always be accessible for reference during use, assembly and commissio-
ning of your Maxi-Smart unit.
Updated handbooks are available through our website www.cattani.it.
We strongly recommend you refer to the updated information on matters concerning safety.
• Signs and warnings
• Danger of electrocution, even a voltage of 230 V
• Biological hazard, infections from epidemic diseases.
• General danger signal.
• Personal protection for heavy duty work.
• Personal protection for biological hazard.
• High temperature.
• No fl ammable, corrosive or explosive substances in this area.
• Required fl ow or rotation direction.
It is not always possible to illustrate all hazards with a danger sign; users are therefore
required to carefully read and observe the warnings provided.
Failing to observe a danger sign or warning may lead to operator or patient injury.
Do not remove safety protections, do not tamper with machines or their operation.
Despite our best efforts, danger signs may overlook some aspects; we apologize if this happens
and kindly ask you to analyse all the possible hazard points and inform us if we have neglected
something.
32
can be deadly.