Setting Down, Transportation And Storage; Maintenance - Miele HS14 Mode D'emploi

Masquer les pouces Voir aussi pour HS14:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

en
The floorhead will be easier to man-
oeuvre. Close the valve when you are
ready to use full power again.
During vacuuming
 When vacuuming, pull the cleaner be-
hind you on its wheels. You can stand
it upright for vacuuming stairs and
curtains etc.
When vacuuming fine dust, e.g.
sawdust, sand, plaster, flour, talcum
powder etc., electrostatic charges
build up naturally. Under certain con-
ditions these charges will be re-
leased. To avoid the unpleasant ef-
fects of these discharges, a metal in-
lay has been incorporated into the
underside of the handle. Please
make sure that you keep your hand
in constant contact with this metal
strip during vacuuming (dia. 23).
Setting down, transportation
and storage
Park system for pauses during vacu-
uming (dia. 24)
The Park system allows you to conveni-
ently park the suction tube and floor-
head during pauses.
 Slot the floorhead into the parking at-
tachment at the back of the vacuum
cleaner.
If your vacuum cleaner is on a slop-
ing surface, e.g. a ramp, retract the
telescopic tube fully.
38
Park system for storage (dia. 25)
Always disconnect the vacuum
cleaner from the electrical supply
when you have finished using it.
Switch it off at the wall socket and
unplug it.
 Stand the vacuum cleaner upright.
Retract the telescopic tube fully so
that the vacuum cleaner takes up less
room for storage.
 Slot the floorhead downwards into
one of the parking attachments on
the side of the vacuum cleaner.
This makes the vacuum cleaner easier
to carry or store.
If your vacuum cleaner has an XXL
handle, you can detach this so that the
vacuum cleaner requires less storage
space (dia. 26).
 Detach the XXL handle from the re-
tracted suction tube.
 Wind the suction hose around the
suction tube and then slot the XXL
handle into the second parking at-
tachment.

Maintenance

Always disconnect the vacuum
cleaner from the electrical supply for
maintenance work and for cleaning.
Switch off at the wall socket and un-
plug it.
The Miele filtration system consists of
three components:
– Dustbag

Publicité

Table des Matières
loading

Table des Matières