Miele HS14 Mode D'emploi page 36

en
Clean hard flooring which is not sus-
ceptible to scratching, as well as floor-
ing with gaps or deep crevices in it with
the brush protruding:
 Press the  foot control.
If the suction power of the adjustable
floorhead seems too high, reduce the
suction until the floorhead is easier
to manoeuvre (see "Use - To regulate
the suction power").
To activate the exhaust filter change
indicator
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (dia.
09).
a AirClean
b Active AirClean 50 (black)
c AirClean Plus 50 (light blue)
d HEPA AirClean 50 (white)
If your vacuum cleaner is fitted with fil-
ter b, c or d, you need to activate the
exhaust filter change indicator.
 Press the release catch for the dust
compartment lid and raise the lid as
far as it will go (dia. 10).
 Remove the indicator strip (dia. 11).
 Press the exhaust filter change indic-
ator (dia. 12).
After approx. 10 - 15 seconds a thin red
line will appear in the left hand side of
the display (dia. 13).
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
36
Exhaust filter change indicator
The exhaust filter change indicator
shows the remaining functional life of
the exhaust filter. After approx. 50 oper-
ating hours, or approx. one year of av-
erage use, the display will be com-
pletely filled with red (dia. 14).
Using the accessories supplied
(dia. 15)
 Dusting brush with natural
bristles (only available in selected
countries)
For cleaning skirting boards, or-
nate and carved objects.
The head can be swivelled to ad-
just the angle.
 Upholstery nozzle
For cleaning upholstery, mat-
tresses, cushions, curtains, covers
etc.
 Crevice nozzle
For cleaning in folds, crevices or
corners.
 Accessories holder for the
above accessories (dia. 16)
Symbols on the holder show
where to attach the different ac-
cessories.
 Attach the accessories holder to the
suction hose where it joins the handle
or to the hose connecter socket on
the vacuum cleaner. Make sure it
clicks into position.
Certain models are supplied as stand-
ard with the following accessories
which are not illustrated on this page.
– Classic Allergotec floorhead