Palmer PEBHER Manuel D'utilisation page 5

PANEL
1
6
7
8 8 8
2 3
5
4
8 9
PANEL DESCRIPTION
1
RATE CONTROL
Adjusts the speed of the modulation. Turning this control clockwise
increases the chorus effect speed.
2
DEPTH CONTROL
Adjusts the depth of the modulation. Turning this control clockwise
increases the chorus effect depth.
3
INTENSITY CONTROL
Herrenchor
Adjusts the amount of chorused signal that is mixed in parallel
with the dry signal. Turning this control clockwise increases the
chorus intensity to 50% dry and 50% wet fully clockwise.
4
ON / OFF SWITCH
Activates the effect or switches the pedal to bypass mode.
5
LED STATUS INDICATOR
Lights when the effect is switched on. This LED also doubles as
battery level indicator when the pedal is battery powered. When the
LED goes dim or no longer lights while the effect is activated the
battery is drained and needs replacing.
6
INPUT
Use a quality instrument or patch cable with 1/4" plugs to connect
your guitar or the output of another effects pedal to this jack.
7
9V DC INPUT
For mains operation, connect an optional 9 Volt DC power adapter to
this barrel style jack. Please refer to "POWER REQUIREMENTS" for
details.
9 9 9