Maintenance Of The Electrical Systems; Information On Screw Gun Maintenance; Machine Handling - TerraTec T.RJP.80M Manuel D'utilisation

800mm babyleaf harvester
Instruction manual
(96) Hold screw C with a 13mm spanner. Loosen nut D
slightly to free up the rotation of screw C.
(97) While holding screw C, tighten or loosen nut E
with another 13mm spanner, to tighten or loosen the
conveyor.
(98) Repeat this operation on both sides of the machine.
(99) Tighten screw C with nut D to lock the assembly in
position.
Excessive tension will reduce the speed
!
of the belt, reduce battery life and in-
crease noise levels.
IMPORTANT

MAINTENANCE OF THE ELECTRICAL SYSTEMS

Information on screw gun maintenance:

CONSULT THE INSTRUCTIONS OF THE COMBI-DRILL
48 www.terrateck.com
E D C
800mm babyleaf harvester
Instruction manual

MACHINE HANDLING

(100) When loading the harvester onto a lorry or trailer, make sure that the combi-drill has been removed from the machine.
(101) Pay particular attention to the safety of people in the surrounding area.
(102) Get another person to guide you.
!
IMPORTANT
(103) To load or unload the machine on a lorry, non-slip ramps with the same incline must be fitted and the harvester must be
moved manually in a straight line.
(104) Use ramps whose specifications are sufficient to support the weight of the RJP 80M harvester.
(105) Preferably, transport the machine with the original pallet proposed as an accessory by your Terrateck agent.
(106) If the machine is equipped with non-original accessories, consult your Terrateck agent for advice.
www.terrateck.com
Make sure no one is near the area in which the harvester is
moving
49