Assembly Instructions; Rear Wheel; Push Bar - TerraTec T.RJP.80M Manuel D'utilisation

800mm babyleaf harvester
Instruction manual
(4) Wear personal protective equipment to operate the machine:
(5) Read the safety instructions in this manual regarding the hazardous points highlighted by the pictograms. Here is the des-
cription of these pictograms:
Mandatory eye
protection
Mandatory eye
protection
WARNING:
General hazard, Hazardous area
Consult your user manual
(6) In the event of an erased or torn pictogram. See (55) and (56).
30 www.terrateck.com
Mandatory eye Mandatory eye
protection protection
Mandatory eye WARNING: SENSITIVE TO MOISTURE
protection Do not wash or splash water.
WARNING:
CUTTING HAZARDS
ATTENTION LAMES
BLADES CARE
RISQUE DE COUPURE
RISK OF CUTS
DANGER
800mm babyleaf harvester
Instruction manual

ASSEMBLY INSTRUCTIONS

REAR WHEEL

(7) Fit the rear wheel tubes into the tubes at the back of the
machine. The wheels must be positioned towards the outside
of the machine.
(8) Tighten the two screws and nuts on each side using the
13mm spanner.

PUSH BAR

(9) Connect the central bar to the left and right arms of the
push bar.
(10) Assemble the two pairs of bolts, on the left and right, with
a pair of 13mm open-ended spanners.
www.terrateck.com 31