Reel - TerraTec T.RJP.80M Manuel D'utilisation

800mm babyleaf harvester
Instruction manual
(11) Fasten the harvest bag tubes to the arms of the push
bar with a 4mm Allen key.
32 www.terrateck.com
(12) Thread the assembly into the holes in the frame and put the
bolts through the holes, when they are aligned.
(13) Tighten the bolts using the 13mm open-ended spanner.
(14) Connect the horizontal tube of the wheel to the vertical tube of the
pick-up reel: the star screw must be on the side opposite the wheel.
Vertical tube of the pick-up reel
Horizontal tube of the wheel
800mm babyleaf harvester
Instruction manual
Front wheel – right side
(15) Insert the horizontal tube of the wheel in the front tube of
the machine: the star screw must face the inside of the ma-
chine and the wheel must be on the outside.

REEL

www.terrateck.com
Front wheel – left side
(16) Fit the bars to the pick-up reel: you can adjust the diameter of the
pick-up reel by pushing in the bars more or less far.
!
In any case, make sure that the bars are always fastened
on each side in both holes.
IMPORTANT
33