Télécharger Imprimer la page

Breathing; Burns; Flying Objects - Senco FinishPro 2n1 Mode D'emploi

Masquer les pouces Voir aussi pour FinishPro 2n1:

Publicité

Les langues disponibles

Les langues disponibles

Read All Safety Warnings Before Using Air Compressor
Hazard
Risk to

Breathing

Risk of

Burns

Risk of

Flying Objects

Safety Warnings
Potential Consequence
 Serious injury or death could
occur from inhaling
compressed air. The air stream
may contain carbon monoxide,
toxic vapors or solid particles.
 Sprayed materials such as
paint, paint solvents, paint
remover, insecticides, weed
killers, etc. contain harmful
vapors and poisons.
 Serious injury could occur from
touching exposed metal parts.
These areas can remain hot for
some time after the air
compressor is shut down.
 Soft tissue damage can occur
from the compressed air
stream.
 Serious injury can occur from
loose debris being propelled at
a high speed from the
compressed air stream.
6
Prevention
 Never inhale air from the air
compressor either directly or
from a breathing device
connected to the air
compressor.
 Operate air compressor only in
a well ventilated area. Follow all
safety instructions provided
with the materials you are
spraying. Use of a respirator
may be required when working
with some materials.
 Never allow any part of your
body or other materials to make
contact with any exposed metal
parts on the air compressor,
motor, or pipework.
 Always wear OSHA required
"Z87" safety glasses to shield
the eyes from flying debris.
 Never point the air stream at
any part of your body, anyone
else or animals.
 Never leave pressurized air
compressor unattended. Shut
off air compressor and relieve
pressure before attempting
maintenance, attaching tools or
accessories.
 Always maintain a safe
distance from people and
animals while operating the air
compressor.
 Do not move the air
compressor while air tank is
under pressure. Do not attempt
to move the air compressor by
pulling on the hose.

Publicité

loading

Ce manuel est également adapté pour:

Finishpro 10Finishpro 15Finishpro 18Ls1xp