Beurer IH 18 Mode D'emploi page 76

Recommended separation distances between portable and mobile RF communications equipment
and the [IH18/1]
The [IH18/1] is intended for use in an electromagnetic environment in which radiated RF disturbances are
controlled. The customer or the user of the [IH18/1] can help prevent electromagnetic interference by maintai-
ning a minimum distance between portable and mobile RF communications equipment (transmitters) and the
[IH18/1] as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P
is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
Beurer GmbH, Söflinger Str. 218, 89077 Ulm, Germany
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
0.12
0.37
1.2
3.8
12
m
80 MHz to 800 MHz
0.12
0.38
1.2
3.8
12
76
800 MHz to 2.5 GHz
0.23
0.73
2.3
7.3
23
0483