Renkforce 419700 Notice D'emploi page 34

Submenu "FUNCTION"
3
The following functions are available:
"SLEEP TIMER"
"DLC"
The functions "NOISE REDUCTION" and the functions "HSTART", "HSIZE", "VSTART", "VSIZE" (see
description at the HDMI-input, chapter 8. c) are illustrated in grey and not adjustable.
Use the submenu "GEOMETRY" instead to generate the image.
Submenu "GEOMETRY"
4
The following functions are available:
"H-POSITION"
"V-POSITION"
"CLOCK"
"PHASE"
"AUTO ADJUST"
34
Automatic deactivation after the end of a specific period
"Dynamic Luminance Ratio"
Moving the image to the left and right
Moving the image to the up and down
Setting the pixel frequency. This changes the image width
Setting the pixel phase. This changes the time of scanning of the digital signal and may
improve the image in bad VGA signals
Automatic setting (select menu item and then push the button "6" on the IR-remote control or
the button "UP/+" at the monitor briefly)