Vga-Input "Vga-In - Renkforce 419700 Notice D'emploi

Submenu "AUDIO"
5
The following functions are available:
"BASS"
"TREBLE"
"BALANCE"
"SOUND MODE"
"AVC"
d) VGA-input "VGA-IN"
When the VGA-input is selected and you push the button "MENU", the associated OSD menu is displayed. The OSD
menu is operated as follows:
• The buttons◄ or ►on the IR-remote control (or "UP/+" and "DOWN/-" on the monitor) are used to select between
the submenu "PICTURE", "OSD", "FUNCTION", "GEOMETRY" and "AUDIO".
• The button▼ or ▲on the IR-remote control (or "SOURCE" on the monitor) can be used to select the functions.
• The buttons◄ or ►on the IR-remote control (or "UP/+" and "DOWN/-" on the monitor) are used to select the
respective set values.
• If you have completed the settings, the button "MENU" will take you back to the selection of the submenu
"PICTURE", "OSD", "FUNCTION", "GEOMETRY" and "AUDIO" .
Leave the OSD menu by pushing the button "MENU" again. Alternatively, wait without pushing a button until the
display of the OSD menu disappears on its own.
32
Bass settings (amplification of the deep tones)
Treble settings (amplification of the high tones)
Balance settings (left/right)
Audio mode (presettings for different input signals, e.g. "MOVIE" for movie playback)
Automatic amplification control on/off