Pelgrim ISW750 Série Notice D'utilisation page 40

INSTALLATION
Montage
EN 10
• Remove the grease filter.
• Interrupt the plug connection of the controls.
• First remove the 6 screws, followed by the frame.
• Use a saw to create a recess in the bottom side of the cupboard
(at a distance of at least 650 mm from a gas hob). Refer to the
measurement drawing for this.
• Attach the unit with the 10 screws provided.
• Put the frame into position with the 6 screws.
• Restore the plug connection of the controls.
• Put the grease filter into position.