Danby DPA120CB1WDB Guide D'utilisation Et D'entretien page 11

Operating Instructions
REMOTE CONTROL INSTRUCTIONS
• Use the remote control within a distance of 8 m
(26 ft.) from the appliance, pointing it towards the
receiver. Reception is confi rmed by a beep.
ON/OFF: Turns the unit on or off
MODE: Selects mode operation
in the following order:
Auto -- > Cool -- > Dry -- > Fan
FAN SPEED: Selects fan speed
in the following order:
Auto -- > Low -- > Med -- > High
SLEEP: Conserves energy
during sleeping hours
LOUVER: Starts and stops
louver swing action
SHORTCUT function (only available on remote):
- Used to save a favourite setting
- Set the unit to the temperature and fan speed that you would like to set as a favourite
- Press and hold the SHORTCUT button for 2 seconds
- Press the SHORTCUT button at any point in future to return to the favourite setting
- If no favourite is set, pressing the SHORTCUT button will cause the unit to run in AUTO mode at
26°C (79°F), with fan speed set to AUTO
SHORTCUT: Sets and activates
favourite setting
TIMER ON: Used to set
TEMP
Auto-on function
TIMER OFF: Used to set
Auto-off function
LED: Turns the LED
display on or off
Model
Rated Voltage
Signal Receiving Range 8m (26 feet)
Environment
8
RG57H(B)/BGCE
3.0V (dry batteries R03/LR03x2)
-5°C to 60°C (23°F to 140°F)