Danby DPA120CB1WDB Guide D'utilisation Et D'entretien page 10

Operating Instructions
OPERATING MODES
Timer Operation
To set the Auto-off timer:
• Ensure the unit is turned on
• Press the TIMER button and the Timer Off indicator light will illuminate
• Press the UP or DOWN buttons to select the desired amount of hours before the unit turns off
To set the Auto-on timer:
• Ensure the unit is turned off
• Press the TIMER button and the Timer On indicator light will illuminate
• Press the UP or DOWN buttons to select the desired amount of hours before the unit turns on
Notes:
• The UP and DOWN buttons will increase or decrease the time in 0.5 hour increments up to 10
hours and then in 1 hour increments up to 24 hours
• The display will revert back to showing the previous temperature setting if the unit does not re-
ceive a signal within a 5 second period during programming
• Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 hours will cancel the
Auto-timer settings
Using the Auto-on and Auto-off feature at the same time
You can set the air conditioner to turn on and run for a set period of time and then turn off again by
using the Auto-on and Auto-off features at the same time. Keep in mind that the hours displayed on
the unit refer to the number of hours that will pass from the current time before the action is taken.
For example:
• First, set the Auto-off timer
• Ensure the unit is turned on
• Press the TIMER button and the Timer Off indicator light will illuminate
• Press the UP or DOWN buttons to select the desired amount of hours before the unit turns off
• Press the Timer button again within 5 seconds and the Timer On indicator light will illuminate
• Press the UP and DOWN buttons to select the desired amount of hours before the unit turns back
on
7