Publicité
5. Cut off the plastic tie that holds the height adjustment
tube in place.
6. (Figure 4) Assemble the R.H. hitch tube to the sweeper
housing using two 5/16" x 1-1/2" carriage bolts (C), and
two 5/16" nylock nuts (J). Do not tighten yet. Repeat
for the L.H. hitch tube.
5/16" NYLOCK NUT (J)
5/16" x 1-1/2"
CARRIAGE BOLT (C)
(Figure 5) Fasten the hitch tubes together using two
7
5/16" x 2-1/2" hex bolts (A) and 5/16" nylock nuts (J).
Do not tighten yet.
5/16" x 2-1/2"
HEX BOLT (A)
ENGLISH
If your tractor hitch has 10" to 13" ground clearance refer
to figure 6. If your tractor hitch has 8" to 10" ground
clearance refer to figure 7.
8. (Figure 6 or 7) Assemble the hitch brackets to the hitch
4
9. At this time tighten the four bolts fastening the hitch
10. (Figure 6 or 7) Assemble the hitch pin (Y), two 3/4" hitch
5
5/16"
NYLOCK NUT (J)
6
tubes using two 5/16" x 2" hex bolts (B) and 5/16" nylock
nuts (J). The bolts should straddle the front hitch tube
bolt. Do not tighten yet.
tubes to the sweeper housing. Next, tighten the two bolts
fastening the ends of the hitch tubes together. Finally,
tighten the two bolts fastening the hitch brackets to the
hitch tubes.
spacers (U) and the 1/8" hair cotter pin (M) to the hitch
brackets.
5/16" NYLOCK
NUT (J)
5/16" NYLOCK
NUT (J)
5/16" x 2"
HEX BOLT (B)
HITCH PIN (Y)
HITCH BRACKET
3/4" SPACER (U)
HITCH BRACKET
(STRAIGHT)
1/8" HAIR
COTTER PIN (M)
5/16" x 2"
HEX BOLT (B)
HITCH PIN (Y)
HITCH BRACKET
(STRAIGHT)
3/4" SPACER (U)
HITCH BRACKET
1/8" HAIR
COTTER PIN (M)
6
7
Publicité
