WIKA GFU08 Mode D'emploi page 32

7. Display unit
7.10.3 Input/output ("inout")
Simple weighing function in input/output mode: The operator selects two weight values
which the display acquires as input weight and as output weight. The electronics
calculate the difference between these two values and automatically prints out the data
EN
(when a printer is connected).
In this operating mode, all tare procedures are deactivated
Performing the weighing function
1. Press the MODE button for the first weighing
⇒
Shown on the display: "--I---" accompanied by a long tone
2 Carry out the weighing.
.
3 Press the MODE button again for the second weighing.
.
⇒
Shown on the display: "--2---
4 Carry out the weighing.
⇒
5 Data is printed.
Annulling the weighing process
How to interrupt the weighing cycle:
1. Press the ENTER/PRINT button after completing the first weighing.
⇒
Shown on the display: "CLEARP" accompanied by a long tone
2 Press the ENTER/PRINT button in order to confirm the deletion of the first weighing.
.
OR
press any other button to continue with the second weighing - without deletion.
32
accompanied by a long tone
"
WIKA operating instructions SF gas filling cart, model GFU08
6