Positioning Oven Feet For Multiple Cabinet Cutout Heights - Whirlpool WOD51EC7AB Instructions D'installation

Positioning Oven Feet for Multiple Cabinet Cutout Heights

Single Ovens
The positioning of the oven feet allow a single oven to be
installed in a cutout height between 26
(74.8 cm). Refer to the following instructions to position the feet
for the size of your cabinet cutout.
Cutout height is between 27
and 28 ⁄ " (72.7 cm)
5
8
The oven feet do not need to be changed. They are positioned
correctly as received.
Go to the "Make Electrical Connection" section.
Cutout Height is between 26
and 27¹¹⁄ " (70.3 cm)
16
1. Using 2 or more people, place the oven on its back
on a covered surface.
⁄ " (68.4 cm) and 29
15
16
⁄ " (70.2 cm)
5
8
⁄ " (68.4 cm)
15
16
2. Remove the foot from the right front spacer by removing
the #8-18 x ³⁄ " screw.
8
NOTE: Do not remove the spacer.
⁄ "
7
16
3. In the same manner, remove the feet on the right rear,
left front, and left rear of the oven.
4. Using 2 or more people, place the oven in its upright
position.
5. Go to the "Make Electrical Connection" section.
Cutout Height is between 28¹¹⁄
and 29 ⁄ " (74.8 cm)
7
16
1. Using 2 or more people, place the oven on its back
on a covered surface.
C
A. Spacer
B. Foot
"
C. #8-18 x ³⁄ screw
8
" (72.8 cm)
16
A
B
7