Makita DVC260 Manuel D'instruction page 8

► 1. Hose cuff 2. Vacuum cleaner body
Assembling wand and nozzle
For vacuum cleaner type only
Connect the nozzle to the extension wand. After that,
shoulder the vacuum cleaner body then connect the
hose with the extension wand.
Connecting extension wand and nozzle
1
► 1. Extension wand 2. Free nozzle 3. T-shape nozzle
Connecting hose and extension wand
► 1. Hose 2. Extension wand 3. Free nozzle
NOTE: The free nozzle can be attached to the hose
directly.
2
1
2
3
Connecting the tool
1
For dust extraction type only
Connect the front cuff on the hose with the tool's
extraction outlet.
2
► 1. Front cuff 2. Extraction outlet
Always use a suitable front cuff. The front cuff can be
detached by turning it counterclockwise while holding
the hose. When connecting, make sure that the front
cuff is securely screwed in the hose.
1
3
► 1. Hose 2. Front cuff
When using the front cuff 24, insert it to the front cuff 22
that is connected to the hose.
1
► 1. Front cuff 22 2. Front cuff 24
8 ENGLISH
1
2
2
2